User des Satmap können ihr Gerät updaten. Dadurch soll es u.a. weniger Stromverbrauch haben, Rotlicht, schnellerer Fix und andere nette Features...
http://www.satmap.com/software.php
Vielleicht kann ein Besitzer sagen, was die aktuelle 1.430 von der 1.400 unterscheidet - Danke
Changes in version 1.400
Customers will experience the following differences with v1.4 ontop of the changes in v1.328:
General Update
- New Splash Screen
Status Bar
- Small Battery Icon
- Improved Power Metering - Optimised for Lithium Primaries and LiPol Rechargeables
- Run / Stop Icon for Statistics Log
- Toggle Icon - When alternate mapping is available.
- WAAS/EGNOS Enabled - GPS Icon turns blue - Selective availability : WAAS (USA) - EGNOS (Europe)
GPS Map Page
- Track Up (Low Centre Spot) - Blue spot lowered option to allow more mapping to be seen ahead. Only 2 data boxes allowable to show max mapping.
- Toggle Function (Top Left Button). New concept of toggle maps. Satmap now has the ability to issue different map "types". For example Aerial coverage can toggle to A-Z mapping, that then toggles to CAA mapping, and then toggles back to Base mapping (typically 1:50k or 1:25k). When an alternate map is available the status bar icon will show. On switchover, the name or type of the new map will briefly show (i.e. "Aerial", "A-Z" or "Base Maps")
- Better handling of co-incident points - i.e. a waypoint on a POI (list box now appears) - allowing the POSITION INFO screen to be always accessed.
Large Map Areas / Aerial
- Better supported: Map packs treated in handy bite size - to effectively allow unlimited mapping to be used (limited currently by 32GB SD card size)
- JPG tile format now supported - leading to better handling of very large / hi res aerial imagery.
Planning Screen
- Distance measurement tools improved. Using the Set Marker function (joystick press whilst in Planning Map) it is now possible to measure distance and bearing (either Mag. or Grid) between any 2 points. Previously users could only measure from their own location.
Position Info Screen
- Lat/Long (DD MM.DDD) and any other supported Grid Ref system can be display simultaneously (E.G UTM or MRGS)
Hibernate (on the latest Platforms (09.02.15 and higher)
- Effectively a Stand By mode - default set at 2 hours (during which time the satellite data is saved (ephemeris and almanac) - so unit does NOT take 20 seconds to load Windows, and does NOT take 1:30 to get satellite lock. Typical lock time out of hibernate : 3-10 seconds. Essentially this means that the useful battery life can be extended by switching on for a quick lock - and then switch off. Note: logging and snail trail does NOT occur during hibernate.
- Hibernate timeout added to Advanced Power Control (0-8 hours)
Screen Capture
- On backlight boost button - now saves a jpg of the screen display (with date time stamp to a. SD card, or b. Flash if no SD card available). Press the Back Light button for 2 seconds and a camera icon appears on the status bar to indicate that a screen shot has been captured.
Settings
- More options to set target speed
- Memory Status : More detailed and clearer information about memory usage (SD Card, Flash and RAM). Low memory exclamation mark added in Memory Status area.
- Backlight - many more low settings (1,2,4,6,8.10,20,30% etc) - to protect night vision.
- Red Backlight - also to protect night vision.
Data
- Moon Phases added for Data boxes.
Datum Support
- Enhanced: New maps and datums now self-contained on SD cards, so they will plug and play without the need for fresh software updates for new countries.
Routes
- Routes Menu tidied up - functions now on buttons - list is for actual routes only.
- Folder concept now supported
- Better handling of very large routes and high numbers of waypoints. More strict filtering to restrict on required waypoints to be displayed.
- Invisible / Inactive routes now do not load in memory at all.
- Inactive routes can be set to show only "SP" - start point - allowing many more routes to be loaded.
- Better track to trail convert - better filtering to retain fewest WPs but best shape.
- Better visibility of active routes - the current leg contains blue arrows and has a blue border.
POIs
- Warning radius increased to 3km (i.e. total diameter 6km) - and red hatched for warning purposes.
- POI-Set by Postcode now available (for the UK units with Postcode data).
- POI-Set by Co-ordinate added.
- Enhanced support for Geocaching.com data (i.e. full hints and geocache log are supported)
- Folder concept supported.
- POI Icon selection - extending to spots, geocaching and other common symbols
SatSYNC 1.4
- Folder manipulation on both the Internal Storage and SD Card available on units with platform 09.02.21 or higher.
- Imported Routes and POIs now available immediately in their respective menus without the need to restart the unit (platform 09.02.15 or higher)
World Map
- Routes and POIs display more accurately now.
TRIP LOG Screen
- Buttons rearranged for more function and clarity.
Power
- During Critical Battery shut down - unit will now be revived if connected to external power - previously it would always shut down.
- Battery fully charged Icon now supported (previously not available)
AND - Bug Fixes.